Large amounts of oils and fats are generated every day in catering units (canteens restaurants, hospitals, etc.) which, if not conveniently intercepted, can cause serious environmental problems and clogging in the pipes.
The grease separation chambers intercept oils and fats from kitchen kitchens, avoiding problems of clogging in the boxes and wastewater collectors, as well as treatment, maintenance and operation problems in the biological treatment.
They comply with the emission limit value for oils and greases of D.L. 236/98 of August 1st.
Application
They are especially suitable for use in catering units, such as canteens, bars, cafes, restaurants or hospitals.
Advantages
- Effective separation of oils and fats.
- Easy access to clean solids.
- Very simple installation.
- Prevents clogging of pipes and manifolds.
- It does not produce odors.
- No energy costs
- Significant benefits for the environment.
- More efficient operation of municipal biological treatment
Models of grease separation chambers
Stainless steel
The liquid effluent goes to a second chamber where the oils and fats are separated from the water due to the difference in densities. Oils and fats, because they are less dense than water, accumulate on the surface of the latter where they are retained, avoiding their discharge to the waste water collectors, and then removed.The effluent from the kitchen sink flows through the tubing to the fat separation chamber where, in the first stage, the solids are retained in a basket (in the model with a basket).
 | | Models | CG1 | CG2 | CG3 | | Flow rate (l/s) | 0,5 | 1,0 | 1,5 | | Operating volume (l) | 40 | 82 | 120 | | Length (mm) | 610 | 710 | 770 | | Height (mm) | 340 | 420 | 410 | | Depth (mm) | 420 | 520 | 620 | | Input Height | 260 | 323 | 333 | | DN (mm) | 40 | 50 | 50 |
|
In polyethylene for surface
  | | Models | Flow rate (Lt/seg) | Volume (Lt) | Diam (mm) | Length (mm) | Height (mm) | Cover (mm) | Pipe (mm) | | | | | | | | | SG100 SG200 SG300 SG500 SG1000 SG2000 SG3000 SG5000 SG10000 SG15000 | 0,5 0,75 0,75 1 2 4 6 10 20 30 | 100 200 300 500 1000 2000 3000 5000 10000 15000 | 420 560 58 730 940 1510 1510 1860 2320 2320 | 580 1050 1320 1250 1550 1725 2375 2470 3300 4580 | 420 710 650 750 950 1630 1630 1890 2400 2400 | Rectangular Rectangular Ø270 Ø220 Ø400 Ø400 Ø400 Ø400 Ø600 Ø600 | DN50 DN110 DN90 DN90 DN110 DN110 DN160 DN200 DN200 DN200 |
|
In polyethylene for burial with decanter
| Flow rate | Volume | Width | Length | Height | Cover | Pipe | | (l/seg) | (l) | (mm) | (mm) | (mm) | (mm) | (mm) | | 2 | 1000 | 940 | 1600 | 1305 | 2x 400 | DN110 | | 4 | 1900 | 940 | 2300 | 1305 | 2x 400 | DN110 | | 7 | 2800 | 1350 | 2250 | 1600 | 2x 400 | DN160 | | 12 | 5000 | 1520 | 2920 | 1820 | 2x 400 | DN200 | | 20 | 8000 | 1840 | 3320 | 2140 | 2x 400 | DN200 |
|  |
Optional
