Oil separator chamber

The oil separating chambers consist of pre-treatment equipment for the separation of fuels and oils present in the washing waters from car workshops, car parks, garages, trucking centers, etc.

Operation

In the oil separator, the effluent enters a first compartment where the particles are sedimented and decanted, also larger hydrocarbon will rise to the surface. Next, the effluent will go to a second compartment through one or more coalescing filters. These filters are intended to agglomerate the small particles of most hydrocarbons, thereby facilitating its rise to water slide. The discharge is equipped with an automatic shut-off system, ensuring that the separated hydrocarbons will not leave the treated effluent, complying with the emission limit of D.L. 236/98 of 1 August.

Features

They are made of high density polyethylene, resistant to corrosion.

Models available

Various models are available for flow rates from 1.5 to 100 l / sec.

Flow rateVolumeWidthLengthHeightCoverPiping
(l/seg)(l)(mm)(mm)(mm)(mm)(mm)
1,590075015801100RectangularDN125
3140075023501100RectangularDN125
632001350250017202xΦ400DN125
1950001520330018902xΦ400DN160
1580001840340022102xΦ400DN200
2090001840380022102xΦ400DN200
30150002320458026402xΦ600DN315
40200002320536026402xΦ600DN315
50250002320664026402xΦ600DN315
65300002320792026402xΦ600DN315
804000023201048026402xΦ600DN315
1004500023201176026402xΦ600DN315